Compliance
Supply Tender Technical Compliance: Sheets That Pass
16 November 2026 · 6 min read · By NextBid Bid Experts
A supply tender's technical offer is checked line by line. Build the compliance sheet and its evidence, and see what the new law, which takes effect in early January 2027, changes on origin.
The technical offer in a supply tender proves, item by item, that what you will deliver meets the specification in the tender booklet. Its core is the statement of compliance: a line-by-line answer to every requirement, each backed by a document the committee can open. This guide shows how to build that sheet and the evidence behind it, so that supply tender technical compliance is checked once, before you submit.
The stakes are set by the law. When a tender is submitted in two files, the examination committee reviews the technical offers first, excludes the unacceptable ones and returns their financial offers unopened with the guarantees (Government Tenders and Procurement Law). Under the current Implementing Regulations, two files are mandatory from SAR 5 million, and below that the entity chooses. For how the two files work together, see the two-envelope system on Etimad.
What goes into a line-by-line statement of compliance?
The booklet sets the format. If it provides a compliance table or a technical schedule, fill in that table and add nothing to its structure. If it does not, build your own on one rule: every requirement in the specification appears as one row, in the booklet's own order and wording.
| Column | What to write | Gap to avoid |
|---|---|---|
| Requirement | The clause exactly as the booklet words it, with its number | A paraphrase that changes the meaning |
| Your response | Complies, partially complies or does not comply, stated plainly | Writing "complies" where the datasheet shows a different value |
| Offered item | Brand, model and part number, matching the item in the bill of quantities | A model that differs from the one priced |
| Evidence | Document name and page number (datasheet, catalogue, certificate) | A reference to a whole catalogue with no page |
| Remarks | Any clarification the clause needs | Conditions hidden in a footnote |
Read every "partially complies" as a risk to settle before the deadline. If a requirement is unclear or your product differs from it, raise it through the inquiry window on Etimad so the entity answers all bidders, rather than deciding the point alone in your sheet. The compliance matrix guide covers the same discipline for the whole booklet.
Which documents back each line?
- Datasheets and catalogues: the manufacturer's current document for the exact model, with the relevant values marked or indexed so the committee finds them without searching.
- Test reports and certificates: only those the booklet names, valid on the opening date.
- Samples: supply them only when the booklet requests them, and follow its instructions on quantity, labelling, place and date.
- Manufacturer authorization: provide it when the booklet asks for it. Check that it names the tender, the items offered and the bidder, and that it is dated and signed.
- Warranty and after-sales commitment: a letter or section that repeats the booklet's required warranty period and support terms, and does not offer less.
The booklet sets the list, so take it from there; do not copy a list from another tender. Our list of technical disqualification reasons shows how gaps in these documents are treated.
How do country of origin and the mandatory national products list affect the sheet?
Under the current law, the preference regulation (Council of Ministers resolution 245) requires supply tenders to exclude offers that do not comply with the mandatory national-products list. The same regulation gives a national product a 10% price preference, calculated from the national-product share of the offer. So where the booklet asks for the origin and the national-product share of each item, state them exactly and support them with the evidence it names.
The new law, which takes effect in early January 2027, changes the way specifications are written: it bars naming a country of origin in them, with exceptions left to its Implementing Regulations, and without prejudice to local-content preference. It also leaves the preference mechanism to a new preference regulation. A tender offered before the new law takes effect stays under the current law unless the Minister of Finance decides to apply some of the new rules to it, so check that tender's booklet and announcements. For the scoring side, see local content in Saudi government tenders and price preference for national products and SMEs.
What should imported goods show on product conformity?
For imported goods, the Saudi Standards, Metrology and Quality Organization (SASO) supervises SABER, the electronic gateway for registering product conformity certificates. A product certificate and a certificate for each shipment may both apply, depending on the product. Which ones your item needs, and which the booklet wants in the technical offer, must be checked on SABER and in the booklet before you write "complies". For medical items, the Saudi Food and Drug Authority (SFDA) requirements are covered in SFDA registration for medical supply tenders.
How do you show warranty, after-sales support and the delivery schedule?
Match the booklet's warranty period, response commitments and delivery period, and give the delivery schedule in the same unit the booklet uses. Do not promise shorter times than your supplier can meet: under the current law, the delay fine on a supply contract is capped at 6% of the contract value, unless a higher rate was approved by the Minister and disclosed to bidders before they bid. The booklet states the rate that applies.
Treat the compliance sheet as the committee's checklist: one row for every requirement in the booklet, and every "complies" pointing to a document and page. If you cannot point to evidence, do not write "complies".
Frequently asked questions
Do I need a compliance sheet if the booklet provides no table?
Yes. A clause-by-clause sheet remains the clearest way to show the committee that each requirement is met, with the evidence beside it, and the format the booklet sets comes first when it gives one.
What if my product meets a requirement only partly?
State it accurately. Writing "complies" for a value the datasheet does not show puts the whole technical offer at risk. Raise the point through the Etimad inquiry window before the deadline so the entity can clarify it for all bidders.
Are samples always required in a supply tender?
No. Submit samples only when the booklet asks for them, and follow its instructions on quantity, labelling, place and date.
Is a manufacturer authorization always required?
No. It is required when the booklet asks for it. When it does, check that the letter names the tender, the offered items and your company.
What happens if the technical offer does not comply?
In a two-file tender the committee reviews the technical offers first. An unacceptable technical offer is excluded and its financial offer is returned unopened with the guarantee, under the Government Tenders and Procurement Law.
Our compliance review checks your documents, formats and mandatory requirements against the booklet before you submit, so the sheet and its evidence are consistent with each other and with the priced bill of quantities.
